The Rule LoPro LP900S is a totally versatile and innovative design and comes with an adjustable outlet and inlet, so that you can suck up water from a lower position in the bilge. Its compact shape allows it to fit the tight the spaces often found in modern bilge designs.Automatic ModesThe Model LS900S is the automatic version and has3 Operation Modes:High water mode; The pump starts when the water level reaches 50mm (2″).Low water mode; Turn the motor cartridge 180 and the sensor is at 33mm (1.3″).Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.FeaturesBrings Rule pumping power to tight spaces3 Automatic operational modesLow profile drains bilges lowerFully rotating discharge body for installation flexibilityChoice of discharge ports supplied with each pumpHorizontal or Vertical mountingIgnition protectedPanel SwitchesThis is a 3 wire pump and requires am On-Off-Auto Panel Switch to complete the install – See Rule Switches No 41 & 43 in Related productsSpecificationsVoltage: 12 V DCCapacity: 900 GPH (3407 LPH)Fuse Size: 7.5Amperage @12V: 4 AAmperage @13.6V: 5 AReplacement Strainer: 1230RHeight: 2.4″ (60 mm)Width: 2.4″ (60 mm)Hose Diameter: MultipleOutput: Up to 56 liters/minute (12.5 US gallons/minute)Discharge head: Maximum recommended 3 mWeight: 0.7 kgSpare Parts and AccessoriesRule Panel Switches: Nos. 41 & 43See related products