International this is “Very easy to use, even at low temperatures, Super Gloss HS can be applied by roller without tipping-off. This makes it incredibly easy to achieve a high-gloss finish with good durability. “FeaturesDesigned for easy roller applicationDelivers full opacity in just 1-2 coatsHigh solids formulation with low VOC andreduced odourSpecificationBrand: InternationalCapacity: 750 mlArea: Above the WaterlineSuitable for: HullFinish/Sheen: High GlossSubstrates: Aluminium / Zinc-Galvanised Steel, GRP/FRP, Steel, WoodApplication Method: Brush & RollerRecommended Number of Coats: 1 – 2Practical Coverage: 12 m/LTypical Shelf Life: 2 YearsColour AvailabilityWhiteBlackWhale GreyOcean BlueLight House RedThames GreenBhama BeigeArtic WhiteAtlantic BluePearl WhitePreparationPREVIOUSLYPAINTEDSURFACESInGoodCondition:Washdownwithasuitabledetergent,rinsewithfreshwaterandallowtodry.Abradewith280 320grade(grit)paperandremovesandingdust.InPoorCondition:Removeallpreviouscoatingsandprimethesubstrate.BAREWOOD/PLYWOOD: Sand smooth with 80-180 and then 280 grade paper. Remove sanding dust by brushing or dusting. Wipe down thoroughly with solvent and allow to dry completely. Ensure that residual sanding dust is removed before product application. Prime using an International Primer.OILYWOODSe.g.Teak: Ensure that the surface is thoroughly degreased using a suitable solvent to ensure all oils are removed. Sand smooth with 80-180 and then 280 grade paper. Remove sanding dust by brushing or dusting. Wipe down thoroughly with solvent and allow to dry completely. Ensure that residual sanding dust is removed before product application. Prime using an International Primer.ALUMINIUM: Degrease with solvent or suitable detergent cleaner. Sand well using 60-120 grade (aluminium compatible) paper. Clean thoroughly and allow to dry. Prime using an International primer as soon as possible (within 8 hours) following product recommendations.STEEL: Degrease with solvent or suitable detergent cleaner. Gritblast to Sa 2 near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface with a 50 75 microns anchor pattern.GRP: Degrease with solvent or suitable detergent cleaner. Sand well using 180-220 grade paper. Clean thoroughly and allow to dry completely. No primer required , apply an International Prekote Undercoat direct to GRP.AGED/WEATHERED GELCOATS: Degrease with solvent or suitable detergent cleaner. Sand well using 180220 grade per. Clean thoroughly and allow to dry completely. To avoid potential pin holing, apply 3 coats of an International 2 pack epoxy primer which must be then overcoated with an International 2 pack undercoat prior to topcoat application.ALL SUBSTRATES: Use One UP.ALL BARE SURFACES: Use a suitable primer system followed by One UP as a primer and apply in 2 coats. Note: a polyester gelcoat can be directly treated with One UP and Super Gloss HS.MethodStir well before use.HintsThinner: Thinner No.1 consult with local representative for temperatures >25CThinning: 010% v/v (maximum) may be added to ease application (depending on colour)Cleaner: Thinner No.1Brush: Thinning is not usually required.Roller: Thinning is not usually required.Ventilation and Humidity Control: Apply in dry, well ventilated conditions. Avoid applying late in the evening as condensation can cause a loss of gloss overnight.Hazard WarningsHazard Pictogram :Signal Word:WarningHazard Statements:Flammable liquid and vapourMay cause drowsiness or dizzinessHarmful to aquatic life with long lasting effectsPrecautionary Statement:General:Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Prevention:Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment.Response:IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.Storage:Keep cool.Disposal:Dispose of contents and container in accordance with all local, regional, national and international regulations.Hazardous IngredientsAll Colours: Hydrocarbons, C9-C11, N-alkanes, Isoalkanes, Cyclics.Supplemental Label ElementsContains 3-iodo-2-propynyl butylcarbamate. May produce an allergic reaction.Technical FilesTechnical Data sheet White – Safety Data Sheet Black- Safety Data Sheet