International Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear. Danboline will resist oil and fuel spillage and cleans easily.FeaturesHardwearing coating for bilges, lockers and bulkheadsChemical resistance to fumes, fuel and oilHigh opacity ensures thorough coverageSpecificationsBrand: InternationalCapacity: 750ml & 2.5LArea: Above the WaterlineSuitable for: Bilge/LockersFinish/Sheen: GlossSubstrates: Aluminium/Zinc-Galvanised Steel, GRP/FRP, Steel, WoodApplication Method: Brush, Conventional Spray, RollerRecommended Number of Coats: 1 – 2Practical Coverage (Brush & Roller): 11 m/L Practical Coverage (Spray): 7.38 m/LTypical Shelf Life: 2 YearsColour AvailabilityWhiteGreyRedPreparationPAINTED SURFACESIn Good Condition Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180280 grade paper.In Poor Condition Remove all previous coatings and prime the substrate.PRIMING All preparation for bare substrates is covered on the appropriate primer datasheet.BARE WOOD Prime with Yacht Primer or Inter protect.STEEL Prime with Yacht Primer or Inter protect.ALUMINIUM Prime with Yacht Primer or Inter protect.GRP Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180220 grade paper. Particular attention should be given to the reverse side of moulded GRP. No priming necessaryMethodSand the primer using 180280 grade wet or dry paper. Remove dust with a dust wipe. Apply 12 coatsHintsMixing: Stir well before use.Thinner: Thinner No.1 (Thinner 910 for spraying)Cleaner: Thinners No.1Ventilation and Humidity Control: Apply in dry, well ventilated conditions.Conventional Spray: Pressure: 34 bar. Tip Size: 1.2 mm. Thin approximately 20% with Thinners 910. SPRAY APPLICATION PROFESSIONAL APPLICATORS ONLY.Other For added protection against moisture absorption and osmosis in the bilges, use Gelshield products.Hazard WarningsHazard Pictogram :Signal Word:WarningHazard Statements:Flammable liquid and vapourMay cause drowsiness or dizzinessHarmful to aquatic life with long lasting effectsPrecautionary Statement:General:Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Prevention:Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment.Response:IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.Storage:Keep cool.Disposal:Dispose of contents and container in accordance with all local, regional, national and international regulations.Hazardous IngredientsGrey, White, Red: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics.Supplemental Label ElementsContains Hydrocarbons, terpene processing by-products. May produce an allergic reaction.Wear appropriate respirator when ventilation is inadequate.Technical FilesTechnical Data sheet White – Safety Data Sheet Grey – Safety Data Sheet