Star brite Teak Sealer lasts longer than traditional sealers. Its UV-inhibitors prevent weathering, fading, and provide more overall protection. Advanced polymers help repel moisture and preserve color on teak and other fine woods.FeaturesProvides More Protection, Lasts Longer Than Traditional OilsContains UV Inhibitors to Help Prevent Weathering and FadingFor Use on Teak and Other Fine WoodsAdvanced Polymers Help Repel Moisture and Preserve ColorDirectionsPREPARE SURFACE:Always start with a clean surface. For graying or dirty wood, clean thoroughly with Starbrite Teak Cleaner. If sanding teak, you must clean the surface before sealing, making sure to remove any loose wax or pitch. Follow with Starbrite Teak Brightenerit not only enhances the grain and patina of the teak, but also opens the pores of the wood, allowing Teak Sealer to penetrate more evenly and provides maximum adhesion and performance. If any stains, black streaks, or dirt marks still remain, use Starbrite Teak Scrub while teak is wet to remove all discolorations. Allow teak to dry completely before applying sealer.Mix sealer by shaking or stirring. Once open, use a mixing stick to stir any solids on the bottom of the container into solution. Apply product with a foam brush in the direction of the wood grain, using short, even brush strokes to obtain a uniform finish. Continue application across entire surface, ending strokes at natural break points, such as a seams. Once complete, apply a second coat to ensure an even, clear finish.TIPS & TRICKS:Brush marks or uneven spots? Easily corrected by rubbing with a clean, dry towel in the direction of the wood grain before sealer dries. Clean any spills or drips immediately with mineral spirits and a clean rag. Sunlight/UV-exposure will speed drying time.NEXT STEPS & MAINTENANCE:Clean wear and tear from heavy traffic areas with Starbrite Boat Wash or diluted Starbrite Teak Cleaner, and allow to dry. Touch up scuffed or scratched spots by applying Teak Sealer. Blend into surrounding area with a clean, dry cloth. Touched-up area will blend in with other treated teak upon drying. Starbrite Teak Sealer will slowly fade as it ages, instead of turning black. At that time, follow these direction completely to refinish surface. If for any reason sealer needs to be removed safely, quickly and efficiently, use Starbrite Gel Formula Teak Cleaner/Restorer.Hazard WarningsHazard pictogram(s): Signal word (GHS-US/CA):DangerHazard statement (GHS-US/CA):H226 Flammable liquid and vapourH304 – May be fatal if swallowed and enters airwaysH315 – Causes skin irritationH317 – May cause an allergic skin reactionH336 – May cause drowsiness or dizzinessH351 – Suspected of causing cancerH361 – Suspected of damaging fertility or the unborn childPrecautionary statement (GHS-US/CA):P201 – Obtain special instructions before useP202 – Do not handle until all safety precautions have been read and understoodP210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smokingP233 – Keep container tightly closedP240 – Ground/bond container and receiving equipmentP241 – Use explosion-proof electrical, ventilating, and lighting equipmentP242 – Use only non-sparking toolsTechnical Files Safety Data Sheet Safety Data Sheet