RAM-Mari-Rivet Aluminum Pop Rivets (4 QTY)

The RAM-MARI-RIVET-4U consists of (4 qty) aluminum 1/8″ pop rivets for blind hole mounting .

Grip Thickness:

1/16″ to 1/4″

Installation Instructions:

1. Locate RAM base to desired mounting location, drill holes with 7/32″ drill.

2. Place Mari-Rivet body all the way through RAM base and pre-drilled 7/32″ holes until flange is firmly secured against mounting surface.

3. Insert rivet gun over mandrel head.

4. Clamp rivet gun; this will initiate the jaws to retract, extracting the mandrel, which pulls the mandrel head into the rivet body setting the rivet. At a predetermined tensile load, the mandrel breaks from its head and is discarded.

Weight:

0.04 lbs.